IT技術者に向きの問題集 - Pass4Test.JP


300-320 模試エンジン & 200-125日本語 認定試験トレーリング、642-889 日本語Pdf問題

過去の300-320 参考書試験問題があります - 彼らの300-320 参考書給料は言うまでもなく高いです & 300-320 参考書の各バーションを提供して、コマンドの300-320 参考書資格問題集 ダウンロード  - 弊社は試験問題集を提供する多くの300-320 参考書ネット - とても大きい影響を与えています300-320 参考書 - 解答は最高の300-320 参考書相似性があり & 300-320 参考書試験を通過することができると思います、試験で高い点数を取ることを保証できるように300-320 参考書、300-320 参考書模試エンジン & 当サイトの300-320 参考書日本語問題集 & 300-320 参考書提供しているサイトです & トレーニング資料は必要とするすべての300-320 参考書人に成功をもたらすことができます

Cisco Certified Network Associate Exam

Exam Number 200-125 CCNA
Associated Certifications CCNA Routing and Switching
Duration 90 Minutes (50-60 questions)
Available Languages English, Japanese
Register Pearson VUE
Exam Policies Read current policies and requirements
Exam Tutorial Review type of exam questions
Recommended Training

Additional Resources
This exam tests a candidate's knowledge and skills related to network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, infrastructure security, and infrastructure management.

Review the exam topics

The following course is the recommended training for this exam.

Interconnecting Cisco Networking Devices: Accelerated v3.0 (CCNAX)
CCNA Routing and Switching Training Videos
Courses listed are offered by Cisco Learning Partners-the only authorized source for Cisco IT training delivered exclusively by Certified Cisco Instructors. Check the List of Learning Partners for a Cisco Learning Partner nearest you.

A variety of Cisco Press titles may be available for this exam. These titles can be purchased through Cisco Press.

The CCNA v3.0 is the latest iteration (at the time of this writing) for the accelerated path to the hugely popular certification, the Cisco Certified Network Associate (CCNA). This exam is targeted at those students that have an extensive background in networking already, and perhaps are already certified by Cisco or in other vendor certifications. For those students that do not meet these criteria, the two exam path to CCNA (ICND1 and ICND2) is strongly recommended. Please visit the appropriate Exam Profiles if interested in those exams.

The Exam Details
Here are the raw details you want to know about this exam:

Number of Questions: 50-60
Types of Questions: Multiple Choice (single and multiple answer), Drag-and-Drop, Simulations, Simlets, and Testlets
NOTE: For a tutorial in this types of questions, be sure to visit the Cisco site—be patient, as the content does take some time to load in your browser initially
Passing score: Cisco may change this at any time, but currently it is around 800-850 out of 1000 possible points
Time Limit: 90 minutes
How to Register: Visit in order to register at a testing center near you

The Exam Topics
While Cisco can refresh their question bank for the exam at any time without warning, they will try and stick closely to the following topics that makeup what we refer to as the exam "blueprint":

1.0 Network Fundamentals (15% of your exam questions will come from this section)
1.1 Compare and contrast OSI and TCP/IP models
1.2 Compare and contrast TCP and UDP protocols
1.3 Describe the impact of infrastructure components in an enterprise network
   1.3.a Firewalls
   1.3.b Access points
   1.3.c Wireless controllers
1.4 Describe the effects of cloud resources on enterprise network architecture
   1.4.a Traffic path to internal and external cloud services
   1.4.b Virtual services
   1.4.c Basic virtual network infrastructure
1.5 Compare and contrast collapsed core and three-tier architectures
1.6 Compare and contrast network topologies
   1.6.a Star
   1.6.b Mesh
   1.6.c Hybrid
1.7 Select the appropriate cabling type based on implementation requirements
1.8 Apply troubleshooting methodologies to resolve problems
   1.8.a Perform and document fault isolation
   1.8.b Resolve or escalate
   1.8.c Verify and monitor resolution
1.9 Configure, verify, and troubleshoot IPv4 addressing and subnetting
1.10 Compare and contrast IPv4 address types
   1.10.a Unicast
   1.10.b Broadcast
   1.10.c Multicast
1.11 Describe the need for private IPv4 addressing
1.12 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
1.13 Configure, verify, and troubleshoot IPv6 addressing
1.14 Configure and verify IPv6 Stateless Address Auto Configuration
1.15 Compare and contrast IPv6 address types
   1.15.a Global unicast
   1.15.b Unique local
   1.15.c Link local
   1.15.d Multicast
   1.15.e Modified EUI 64
   1.15.f Autoconfiguration
   1.15.g Anycast

2.0 LAN Switching Technologies (21% of your exam questions will come from this section)
2.1 Describe and verify switching concepts
   2.1.a MAC learning and aging
   2.1.b Frame switching
   2.1.c Frame flooding
   2.1.d MAC address table
2.2 Interpret Ethernet frame format
2.3 Troubleshoot interface and cable issues (collisions, errors, duplex, speed)
2.4 Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
   2.4.a Access ports (data and voice)
   2.4.b Default VLAN
2.5 Configure, verify, and troubleshoot interswitch connectivity
2.5.a Trunk ports
   2.5.b Add and remove VLANs on a trunk
   2.5.c DTP, VTP (v1&v2), and 802.1Q
   2.5.d Native VLAN
2.6 Configure, verify, and troubleshoot STP protocols
   2.6.a STP mode (PVST+ and RPVST+)
   2.6.b STP root bridge selection
2.7 Configure, verify and troubleshoot STP related optional features
   2.7.a PortFast
   2.7.b BPDU guard
2.8 Configure and verify Layer 2 protocols
   2.8.a Cisco Discovery Protocol
   2.8.b LLDP
2.9 Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel
   2.9.a Static
   2.9.b PAGP
   2.9.c LACP
2.10 Describe the benefits of switch stacking and chassis aggregation

3.0 Routing Technologies (23% of your exam questions will come from this section)
3.1 Describe the routing concepts
   3.1.a Packet handling along the path through a network
   3.1.b Forwarding decision based on route lookup
   3.1.c Frame rewrite
3.2 Interpret the components of a routing table
   3.2.a Prefix
   3.2.b Network mask
   3.2.c Next hop
   3.2.d Routing protocol code
   3.2.e Administrative distance
   3.2.f Metric
   3.2.g Gateway of last resort
3.3 Describe how a routing table is populated by different routing information sources
   3.3.a Admin distance
3.4 Configure, verify, and troubleshoot inter-VLAN routing
   3.4.a Router on a stick
   3.4.b SVI
3.5 Compare and contrast static routing and dynamic routing
3.6 Compare and contrast distance vector and link state routing protocols
3.7 Compare and contrast interior and exterior routing protocols
3.8 Configure, verify, and troubleshoot IPv4 and IPv6 static routing
   3.8.a Default route
   3.8.b Network route
   3.8.c Host route
   3.8.d Floating static
3.9 Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
3.10 Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
3.11 Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)
3.12 Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)
3.13 Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)
3.14 Troubleshoot basic Layer 3 end-to-end connectivity issues

4.0 WAN Technologies (10% of your exam questions will come from this section)
4.1 Configure and verify PPP and MLPPP on WAN interfaces using local authentication
4.2 Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
4.3 Configure, verify, and troubleshoot GRE tunnel connectivity
4.4 Describe WAN topology options
   4.4.a Point-to-point
   4.4.b Hub and spoke
   4.4.c Full mesh
   4.4.d Single vs dual-homed
4.5 Describe WAN access connectivity options
   4.5.a MPLS
   4.5.b Metro Ethernet
   4.5.c Broadband PPPoE
   4.5.d Internet VPN (DMVPN, site-to-site VPN, client VPN)
4.6 Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)
4.7 Describe basic QoS concepts
   4.7.a Marking
   4.7.b Device trust
   4.7.c Prioritization
      4.7.c. [i] Voice
      4.7.c. [ii] Video
      4.7.c. [iii] Data
   4.7.d Shaping
   4.7.e Policing
   4.7.f Congestion management

5.0 Infrastructure Services (10% of your exam questions will come from this section)
5.1 Describe DNS lookup operation
5.2 Troubleshoot client connectivity issues involving DNS
5.3 Configure and verify DHCP on a router (excluding static reservations)
   5.3.a Server
   5.3.b Relay
   5.3.c Client
   5.3.d TFTP, DNS, and gateway options
5.4 Troubleshoot client- and router-based DHCP connectivity issues
5.5 Configure, verify, and troubleshoot basic HSRP
   5.5.a Priority
   5.5.b Preemption
   5.5.c Version
5.6 Configure, verify, and troubleshoot inside source NAT
   5.6.a Static
   5.6.b Pool
   5.6.c PAT
5.7 Configure and verify NTP operating in a client/server mode

6.0 Infrastructure Security (11% of your exam questions will come from this section)
6.1 Configure, verify, and troubleshoot port security
   6.1.a Static
   6.1.b Dynamic
   6.1.c Sticky
   6.1.d Max MAC addresses
   6.1.e Violation actions
   6.1.f Err-disable recovery
6.2 Describe common access layer threat mitigation techniques
   6.2.a 802.1x
   6.2.b DHCP snooping
   6.2.c Nondefault native VLAN
6.3 Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering
   6.3.a Standard
   6.3.b Extended
   6.3.c Named
6.4 Verify ACLs using the APIC-EM Path Trace ACL analysis tool
6.5 Configure, verify, and troubleshoot basic device hardening
   6.5.a Local authentication
   6.5.b Secure password
   6.5.c Access to device
      6.5.c. [i] Source address
      6.5.c. [ii] Telnet/SSH
   6.5.d Login banner
6.6 Describe device security using AAA with TACACS+ and RADIUS

7.0 Infrastructure Management (10% of your exam questions will come from this section)
7.1 Configure and verify device-monitoring protocols
   7.1.a SNMPv2
   7.1.b SNMPv3
   7.1.c Syslog
7.2 Troubleshoot network connectivity issues using ICMP echo-based IP SLA
7.3 Configure and verify device management
   7.3.a Backup and restore device configuration
   7.3.b Using Cisco Discovery Protocol or LLDP for device discovery
   7.3.c Licensing
   7.3.d Logging
   7.3.e Timezone
   7.3.f Loopback
7.4 Configure and verify initial device configuration
7.5 Perform device maintenance
   7.5.a Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
   7.5.b Password recovery and configuration register
   7.5.c File system management
7.6 Use Cisco IOS tools to troubleshoot and resolve problems
   7.6.a Ping and traceroute with extended option
   7.6.b Terminal monitor
   7.6.c Log events
   7.6.d Local SPAN
7.7 Describe network programmability in enterprise network architecture
   7.7.a Function of a controller
   7.7.b Separation of control plane and data plane
   7.7.c Northbound and southbound APIs

我々の商品の質量を保証するために、専門家たちは商品の開発を研修しています。過去の試験のデータを基づいて、300-320 模試エンジンを開発しています。現在でも、問題集の更新に働いています。複数の更新を通して、今の的中率高い300-320 模試エンジンになりました。我々の300-320 模試エンジンで試験に合格することができると信じています。

試験科目:「Designing Cisco Network Service Architectures」
問題と解答:全305問 300-320 模試エンジン

>> 300-320 模試エンジン

試験科目:「CCNA Cisco Certified Network Associate CCNA (v3.0) (200-125日本語版)」
問題と解答:全550問 200-125日本語 認定試験トレーリング

>> 200-125日本語 認定試験トレーリング

試験科目:「Implementing Cisco Service Provider Next-Generation Egde Network Services」
問題と解答:全126問 642-889 日本語Pdf問題

>> 642-889 日本語Pdf問題


Pass4TestのCiscoの200-125日本語 認定試験トレーリングのトレーニングキットはPass4TestのIT技術専門家たちによって開発されたのです。そのデザインは当面の急速に変化するIT市場と密接な関係があります。Pass4Testのトレーニングはあなたを助けて継続的に発展している技術を利用して、問題を解決する能力を高めると同時に仕事についての満足度を向上させることができます。Pass4TestのCiscoの200-125日本語 認定試験トレーリングの認証したカバー率は100パーセントに達したのですから、弊社の問題と解答を利用する限り、あなたがきっと気楽に試験に合格することを保証します。

642-889 日本語Pdf問題が提供した教育資料は真実のテストに非常に近くて、あなたが弊社の短期の特殊訓練問題を通じてすぐにIT専門の知識を身につけられます。弊社は君の試験の100%合格率を保証いたします。


Related Links:
投稿日: 2017/3/30 12:28:14  |  カテゴリー: Cisco  |  タグ: 300-320 模試エンジン200-125日本語 認定試験トレーリング642-889 日本語Pdf問題Cisco